A3 Mk2
Dismantling and assembling selector forks |
Special tools and workshop equipment required |
t | Thrust plate -VW 402- |
t | Press tool -VW 411- |
t | Tube -VW 426- |
t | Press tool -VW 431- |
t | -1-Internal puller 18.5 ... 23.5 mm -Kukko 21/3- |
t | -4-Counter-support -Kukko 22/1- |
1 - | Damper rubber |
q | Pull out of selector rod and install by hand |
2 - | Selector rod with selector fork for 1st and 2nd gear |
3 - | Selector rod with selector fork for 3rd and 4th gear |
4 - | Selector rod with selector fork for 5th and 6th gear |
5 - | Reverse gear selector fork |
q | Ball sleeve is not fitted from gearbox manufacturing date 06 03 6 → Item |
q | Gradual modification |
q | Different types of reverse gear selector forks are fitted according to version |
q | Identification of different types of reverse gear selector forks → Fig. |
6 - | Ball sleeve |
q | Pulling out → Fig. |
q | Pressing in → Fig. |
q | Ball sleeve is not fitted from gearbox manufacturing date 06 03 6 |
q | Gradual modification |
|
Dimension “a” (mm) | Gearbox manufacturing date |
24 | Up to 05 03 6 |
18 | From 06 03 6 |
|
|