audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Tightening torques: > < Removing Haldex coupling - final drive remains installed

A3 Mk2

Installing
Installing
Perform installation in reverse sequence of removal. Note the following:
   
–  Remove "old" O-ring -arrow- from Haldex coupling.
–  Insert new O-ring -arrow- and lubricate lightly with high performance oil for Haldex coupling.
  N39-10103
–  Insert Haldex coupling into rear final drive
–  Tighten bolts -arrows- to tightening torque → Chapter.
  A39-10058
–  Plug connector -2- into four-wheel drive control unit -J492-.
–  Install flexible coupling (rear) → Chapter.
–  Install exhaust system and align free of stress → Rep. Gr.26.
–  Fill with new high performance oil for Haldex coupling and check oil level in Haldex coupling → Chapter
  N39-10090

Tightening torques: > < Removing Haldex coupling - final drive remains installed