A3 Quattro V6-3.2L (BUB) (2008)
-
Free up coolant hose at bottom on fan shroud.
-
Disconnect electrical connector -3- at Secondary Air Injection (AIR) Pump Motor V101 and free up electrical wiring.
-
On vehicles with DSG transmission, remove coolant pipe bracket -2- to transmission oil cooler.
-
Remove bolts -.
-
Loosen bolt - 4- and remove Secondary Air Injection (AIR) pump with bracket.
-
Disconnect electrical harness connectors -1- for coolant fans at bottom on fan shroud.
-
Remove mounting bolts for fan shroud at bottom - bottom arrows -.
-
Pull out fan shroud downward with both fans.
-
Disconnect electrical harness connector -1- for A/C clutch on A/C compressor and free up electrical wire.
CAUTION: The air conditioning refrigerant circuit must not be opened.
-
Remove bolts -arrow- for A/C compressor.
-
Securely tie A/C compressor with connected coolant hoses at front on the longitudinal member.