Remote control adaption procedure (adaption channel “04”) |
Note t
| The “Adaption” function is to be implemented on vehicles with auxiliary heater and “Remote control” as optional extra. |
t
| A maximum of 4 remote control units can be adapted in the auxiliary heating radio controlled receiver -R64-. Adaption of a fifth remote control unit causes the first matched remote control to be erased. |
t
| The remote control is adapted in the auxiliary heating radio controlled receiver -R64-. If this is replaced, all existing remote control units must be consecutively re-adapted. If the auxiliary heater control unit -J364- is replaced, it is nevertheless necessary to check operation of the remote control and if necessary to re-adapt all auxiliary heater remote control hand transmitters (if operation is not OK). |
|
|
|