Audi Workshop Service and Repair Manuals

Removing

• ‒ Remove front left wheel.

Vehicles with TDI engine:

• ‒ → Remove bolt -2- on noise insulation cover above left drive shaft.
• ‒ Disengage retainer -1- and remove noise insulation cover.

All models

• ‒ → Pull connector -arrow A- off sender.
• ‒ Press down sender retaining catch and turn -arrow-.
• ‒ Pull out sender.

Installing

Install in reverse order but note following:

• ‒ → Renew O-rings -arrows-.
• ‒ Lubricate O-rings with gear oil before inserting.
• ‒ Insert sender.
• ‒ Engage retaining catch on bearing bracket for flange shaft.