Audi Workshop Service and Repair Manuals

→ Location: the gearbox speed sender is located at top left of gearbox.

Vehicles with TDI engine:

• ‒ → Remove bolt -2- on noise insulation cover above left drive shaft.
• ‒ Disengage retainer -1- and remove noise insulation cover.

All models

• ‒ Unplug electrical connector.
• ‒ Remove securing bolt.
• ‒ Pull out sender.
• ‒ Always renew O-ring.
• ‒ Moisten O-ring with ATF.

Installation is performed in the reverse order.

Tightening torque