Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing ATF lines for 6-cyl. diesel engines >
< Removing and installing ATF lines for 4-cyl. petrol engines
A4 Mk1
Power transmission
Automatic Gearbox 01VFWD and 4WD
Automatic gearbox, control, assembly, housing
Dismantling and assembling gearbox
Removing and installing ATF lines for 6-cyl. petrol engines
Automatic Gearbox 01VFWD and 4WD
Dismantling and assembling gearbox
Removing and installing ATF lines for 6-cyl. petrol engines
Notes:
◆
Place drip tray V.A.G 1306 underneath.
Release and tighten bolt - 21 Nm
◆
Before tightening insert wiring manually until stop
ATF line from cooler
◆
Observe markings on gearbox housing
Oil line to radiator
◆
Observe markings on gearbox housing
O-ring
◆
Insert with ATF
◆
Always replace
O-ring
◆
Insert with ATF
◆
Always replace
Release and tighten bolt - 5 Nm
Release and tighten bolt - 5 Nm
O-ring
◆
Insert with ATF
◆
Always replace
Bracket
Union nut, 25 Nm
Hexagon bolt, 5 Nm
Clip
Union nut, 25 Nm
Hexagon bolt, 10 Nm
Hexagon bolt, 65 Nm
Power transmission
Automatic Gearbox 01VFWD and 4WD
Automatic gearbox, control, assembly, housing
Dismantling and assembling gearbox
Removing and installing ATF lines for 6-cyl. petrol engines
Removing and installing ATF lines for 6-cyl. diesel engines >
< Removing and installing ATF lines for 4-cyl. petrol engines