Audi Workshop Service and Repair Manuals

Note:

Overview of adjustments when replacing individual components

=>Page 39-168.

•     S1 -    Adjustment shim for crown wheel in cover for final drive
•     S2 -    Shim for crown wheel in final drive housing
•     S3 -    Shim for drive pinion in final drive housing

Special tools, testers and auxiliary equipment required

• ◆ Dial gauge extension VW 382/10
• ◆ Universal mandrel VW 385/1
• ◆ Centring disc VW 385/2
• ◆ Centring disc VW 385/3
• ◆ Measuring plunger VW 385/14
• ◆ Dial gauge extension VW 385/15

• ◆ Measuring plate VW 385/17
• ◆ Master gauge VW 385/30
• ◆ End measuring plate VW 385/33
• ◆ Universal dial gauge retainer VW 387
• ◆ Measuring lever VW 388
• ◆ Thrust plate VW 401

• ◆ Thrust plate VW 402
• ◆ Press tool VW 408 A
• ◆ Mounting rails VW 457
• ◆ Adjustment tool for crown wheel VW 521/4
• ◆ Adjustment tool for crown wheel VW 521/8
• ◆ Engine and gearbox support VW 540

• ◆ Thrust plate 30-205
• ◆ Inserter ring 2003/3
• ◆ Pinion assembly device 2052/2
• ◆ Thrust plate 3005
• ◆ Holding tool 3028
• ◆ Thrust pad 3062

• ◆ Assembly device 3253 with 3253/3 and 3253/4
• ◆ Holding tool 3304
• ◆ Engine/gearbox lifter
  V.A.G 1383 A
• ◆ Dial gauge extension 30 mm
• ◆ Dial gauge
• ◆ Torque gauge 0 ... 600 Ncm