A4 Mk2
|
|
1 - | Spring clip |
2 - | Luggage compartment trim |
t | Removing: |
– | Remove side padding (rear seat) → Chapter / side airbag (rear) → Chapter. |
– | Disengage luggage compartment floor from storage well liner and detach. |
– | Remove rear cross panel trim → Chapter. |
– | Remove bolts -4- (4x) for fastening rings -5-. |
– | Remove bolt -3- (1x). |
– | Unclip trim - spring clips -1- (4x). |
– | Unplug electrical connector for rear socket (right trim). |
t | Installing: |
Install in reverse order of removal. Observe the following: |
– | Rubber seal for rear lid must be fitted over rear cross panel trim. |
Caution
|
3 - | Bolt |
q | Tightening torque: 1.8 Nm |
4 - | Bolts (4x) |
q | Tightening torque: 4 Nm |
5 - | Fastening rings |