audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exploded view of seat cover and padding (seat pan with seat depth adjustment) > < Removing and installing cover and padding (backrest)

A4 Mk3

Detaching cover from padding and assembling (backrest)
Detaching cover from padding and assembling (backrest)
  Note
The procedures described relate to the standard or sports seat (front, with manual or electric adjustment) and the convenience seat (front).
Special tools and workshop equipment required
   
t  Upholstery clip pliers -V.A.G 1634-
  W00-0484
Removing
–  Detach cover and padding from backrest → Chapter.
–  Detach cover -1- as far as possible from padding -3-.
–  Release fastening strip -4- from clips -2-.
–  Detach cover from padding.
  A74-10252
Equipment version with fabric covers:
–  Unclip contour wire -3- (inserted in pouch -2- of cover -1-) from clips -4-.
–  Detach cover from padding -5-.
  A74-10251
Equipment version with leather covers:
–  Use pliers -4- to pinch off upholstery clips -3-.
–  Detach cover -1- from padding -2-.
Installing
Installation is carried out in the reverse order; note the following:
–  On equipment version with leather seats, use upholstery clip pliers -V.A.G 1634- to fit new upholstery clips.
  A74-10263

Exploded view of seat cover and padding (seat pan with seat depth adjustment) > < Removing and installing cover and padding (backrest)