| Removing and installing vacuum pump (V6 TFSI engine) |
| The vacuum pump is located in the front of the engine compartment on the left side. |
| –
| Slacken hose clip on vacuum hose. |
Caution | Take care not to damage the vacuum hose. The vacuum hose must be renewed if it is damaged. |
|
| –
| Detach vacuum hose from vacuum pump. |
| –
| Slacken all bolts at sealing flange of vacuum pump and remove. |
| –
| Pull vacuum pump out of its mounting. |
Note | Ensure that seal is seated correctly. |
| –
| Turn drive lugs of vacuum pump so they engage in slots in camshaft when vacuum pump is installed. |
| –
| Fit vacuum pump in position. |
| –
| Ensure that seal is seated correctly. |
| –
| Fit all bolts to sealing flange of vacuum pump and tighten. |
| –
| Slide new hose clip onto vacuum hose. |
| –
| Slide vacuum hose onto connection on vacuum pump. |
| –
| Use suitable pliers to tighten hose clip on connection of vacuum pump. |
|
|
|
