audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing selector lever lock solenoid N110 > < Checking selector mechanism

A4 Mk3

Manual release for selector mechanism
Manual release for selector mechanism
  Note
t  If the battery is disconnected or discharged, the selector lever cannot be shifted from position “P”. In this case, the vehicle cannot be pushed or towed.
t  When you operate the manual release mechanism the selector lever lock solenoid -N110- will release the lock without current supply.
   
Procedure
–  Remove front ashtray insert.
–  Use screwdriver to pry off the cover cap in the ashtray housing -arrow-.
  Note
The shape of the cover cap may differ from the illustration.
  A37-10060
–  Carefully insert tool (e.g. screwdriver) through centre opening in ashtray housing and into cylinder -arrow- on selector lever lock solenoid -N110- and at the same time press and hold interlock button and move selector lever out of position “P”.
  Note
t  This releases the selector lever lock in position “P” by way of the locking lever -1-.
t  The cylinder -arrow- on selector lever lock solenoid -N110- may be partially concealed by noise insulation or wiring (move clear to one side).
  A37-10757

Removing and installing selector lever lock solenoid N110 > < Checking selector mechanism