–
| Switch off ignition and take out ignition key. |
–
| Turn light switch to position „0“. |
–
| Open cover in luggage compartment side trim. |
–
| Swivel tail light -1- outwards -arrow-, and at the same time disengage retaining pins from body. |
–
| Unplug electrical connector. |
Installation is carried out in the reverse order; note the following: |
Note Ensure that self-adhesive seal on tail light housing seals properly. |
–
| Fit tail light cluster in position on body and press retaining pins into holes. |
|
|
|