A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-1368004.png)
-
Remove shielding plate - A - from transmission - arrows -.
-
Check whether there is a marking (colored marking) on driveshaft and at flange/driveshaft at rear final drive.
-
If this marking is not present, then mark in color the position of driveshaft flange - arrow A - to rear final drive - arrow B -.
-
Attach Alignment Fixture - 4W Dr. Shaft (3139 ) and tighten plastic nuts.
