A4 Quattro Wagon V6-3.0L (AVK) (2002)
^
Installation position: The open side of the sealing ring faces the transmission.
-
Fill area between sealing lip and dust lip halfway with sealing grease G 052 128 Al.
-
Install right drive flange.
-
Install bolt for drive flange (arrow, 23 Nm) while securing drive flange against turning, using a drift.
-
Install right drive axle -1-.
-
Install heat shield for right drive axle (arrows).
Third bolt is not visible in the illustration.
-
Install front wheel.
-
Check oil level in front final drive.
Tightening torques