audi Workshop Repair Guides

Audi A5 Service and Repair Manuals | Workshop Guides

ABOUT US
Exploded view - centre differential housing - propshaft with splines on gearbox end > < Gear oil (MTF) in gearbox section, front final drive and transfer box

Exploded view - Front final drive and oil seals: 7-speed dual clutch gearbox

Renewing mounting bracket and ball bearing for flange shaft (left-side)
Renewing mounting bracket and ball bearing for flange shaft (left-side)
Special tools and workshop equipment required
   
t  Thrust plate -VW 401-
  W00-0135
t  Thrust plate -VW 402-
  W00-0136
t  Press tool -VW 412-
  W00-0139
t  Tube -VW 516-
  W00-0364
–  Remove flange shaft (left-side) → Chapter.
–  Remove circlip -1- from flange shaft.
  A39-10432
–  Press ball bearing -A- off flange shaft.
  A39-10433
–  Fit new mounting bracket -1-.
l  Installation position: side with lettering faces towards flange for drive shaft.
–  Fit new ball bearing -2-.
  A39-10455
–  With mounting bracket -B- installed, press on ball bearing -A- as far as stop.
  A39-10434
–  Fit circlip -1- in annular groove on flange shaft.
  A39-10432

Exploded view - centre differential housing - propshaft with splines on gearbox end > < Gear oil (MTF) in gearbox section, front final drive and transfer box