A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-2238004.png)
-
Place plastic sleeve - A - on valve stem to prevent damage to new valve stem seals - B -.
-
Lightly coat sealing lips of valve stem seal with oil.
-
Push valve stem seal onto plastic sleeve.
-
Carefully press valve stem oil seal onto valve guide using (3365).
-
Remove plastic sleeve again.
If the valve keepers were removed from the installation cartridge, they must then be inserted into the Valve Keeper Insertion Device (VAS 5161/18).
‹› The large diameter of the valve keepers point upward.
-
Install valve spring and valve spring plate.
