A8 Quattro Sedan V8-4.2L (AUX) (2001)
2 - Sealing ring
^
Always replace
3 - Bolt
^
10 Nm (7 ft. lbs.)
^
Tighten oil pan bolts diagonally in several stages
4 - Oil pan
5 - Gasket
^
Always replace
6 - ATF sump
7 - O-ring
^
Always replace
^
Coat with Vaseline
8 - Screw
^
8 Nm (71 inch lbs.)
^
For mounting valve body
^
M6 x 30, quantity: 5
^
M6 x 55 (chromed), quantity: 1
^
M6 x 60, quantity: 15
^
Note tightening method
9 - Valve body
10 - O-ring
^
Always replace
^
Coat with special grease
11 - Speedometer - Vehicle Speed Sensor (VSS) -G22-
12 - Sender for -transmission output RPM -G195-
13 - Sealing ring for selector lever shaft
14 - Selector lever
^
To remove, slotted spring pin -15- must be removed
15 - Slotted spring pin
16 - Multi-function Transmission Range (TR) switch -F125-
17 - Screw
^
Tighten to 8 Nm (71 inch lbs.)
18 - Bracket for multifunction switch harness
^
Fastened with screws for multifunction switch
19 - Screw
^
Tighten to 5 Nm (44 inch lbs.)
20 - Bracket for solenoids
^
Must be removed to replace solenoids
21 - Solenoid valve 3 -N90-
^
Without O-ring
^
To replace, remove and install oil pan
22 - Solenoid valve 2 -N89-
^
Without O-ring
^
To replace, remove and install oil pan
23 - Solenoid valve 1 -N88-
^
Without O-ring
^
To replace, remove and install oil pan
24 - Pressure regulator valve 5 -N233-
^
With 0 ring
^
Coat O-ring with thin coat of Vaseline to install
^
To replace, remove and install oil pan
25 - Pressure control valve 2 -N216-
^
With 0 ring
^
Coat O-ring with thin coat of Vaseline to install
^
To replace, remove and install oil pan
26 - Pressure control valve 3 -N217-
^
With 0 ring
^
Coat O-ring with thin coat of Vaseline to install
^
To replace, remove and install oil pan
27 - Pressure control valve 4 -N218-
^
With O-ring
^
Coat O-ring with thin coat of Vaseline to install
^
To replace, remove and install oil pan
28 - Pressure control valve 1 -N215-
^
With O-ring
^
Coat O-ring with thin coat of Vaseline to install