Cabriolet V6-2.8L (AFC) (1995)
ADJUSTING
-
Vehicle at curb weight; i.e. fuel tank completely full, with spare tire, vehicle tool kit and jack in specified positions
-
Brake hydraulic system filled and bled to specifications
-
Vehicle on platform-type lift or over inspection pit (vehicle must be standing on wheels)
-
Loosen nut (1 in illustration (already loose)).
-
Install adjustment device 3284 in holes (arrows at 2 in illustration) in brake proportioning valve.
-
Tighten nut (1 in illustration) to 20 Nm (15 ft lb).
-
Remove adjustment device.
-
Tighten mounting bolts for rear axle bearing mount on both sides with vehicle standing on its wheels.
Tighten to: 80 Nm (59 ft lb) plus 1/4-turn (90°)