TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
^
The surface of the piston and seal must be cleaned with methylated spirits and then dried.
^
Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.
^
Insert oil seal in brake caliper housing.
^
Place protective seal with the outer sealing lip on the piston.
^
Using wedge 3409, insert the inner sealing lip into the grove in the cylinder.
Note: When doing this hold piston in front of caliper housing.
^
Apply special tool 3272 together with 3272/1 to piston on brake caliper housing.
^
Screw piston into housing by turning knurled wheel clockwise.
Note: Adjusting piston with a normal resetting tool destroys automatic adjuster in brake caliper.
^
Install brake pads.
Pre-bleeding brake caliper