1 Series E81 130i (N52K) 3-door
Place dial gauge sensor on rim shoulder.
Turn wheel by hand and measure max. radial runout.
Carry out measurement on both rim shoulder sides.
Note:
Dial gauge must be vertical to rim shoulder.
Position sensor on rim flange.
Turn wheel by hand and measure max. lateral runout.
Carry out measurement on both rim flanges.
Note:
Dial gauge must be vertical to rim flange.
Important!
Avoid transformation errors during subsequent installation
tasks.
RA Checking rim for face and radial runout
BMW AG - TIS
22.01.2013 06:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -