1 Series E81 130i (N52K) 3-door
63 21 101
Replacing sealing frame for left or right rear
light
Necessary preliminary tasks:
•
Remove rear light
If necessary, remove sealing frame for rear light (1) from rear
light (2).
Detach sealing frame for rear light (1) completely from rear
light base (4).
Clean bonding surface and allow to dry.
Installation:
Remove protective film from adhesive surface of new sealing
frame for rear light.
Centre sealing frame for rear light (1) using retaining bores (2)
and moulded edge (3) and stick onto rear light base (4).
Make sure sealing frame for rear light (1) is correctly bonded all
round on rear light base (4).
RA Replacing sealing frame for left or right rear light
BMW AG - TIS
22.01.2013 09:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
