3 Series E36 318i (M44) SAL
Note:
At firing TDC, alignment bores are pointing upwards.
Remove dust cover from locating bore.
Rotate engine from 45
°
before TDC position engine-wise until in
TDC position.
Secure crankshaft in TDC position with Special Tool 11 2 300.
Caution!
Remove Special Tool 11 2 300 before starting engine.
Place the chain with the chain wheels.
Note:
Arrow on chain wheel in cylinder axis points up.
Align long bores centrally.
RA Removing and installing cylinder head (M44)
BMW AG - TIS
27.01.2013 02:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -