3 Series E36 M3 (S50) SAL
Push in VANOS control unit as far as timing case.
Note:
Screw down ground strap with screw (7).
Insert screws (1 ... 9) in VANOS adjustment unit and tighten
down in two passes.
Replace sealing ring in cover for hydraulic piston on exhaust end.
Fit cover on hydraulic piston and tighten down.
Tightening Torque,
refer to Technical Data 11 36 11AZ.
Intake end
Replace collar nut of spline shaft on intake end.
Brace against shaft and tighten collar nut.
Tightening Torque,
refer to Technical Data 11 36 6AZ.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B32)
BMW AG - TIS
09.02.2013 21:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
