3 Series E46 316i (M43TU) SAL
11 42 020
Removing and installing, sealing / replacing
complete main flow oil filter (M43 / M43TU)
Unfasten oil filter cover to allow oil to flow out of main flow oil filter
housing and back into oil pan.
This task is described in the section BMW engine oil service,
refer to 00 00 249.
Remove alternator,
refer to 12 31 020.
Unfasten vane pump for power steering unit from carrier (lines
remain connected).
Remove alternator carrier.
Remove full-flow oil-filter housing.
RA Removing and installing, sealing / replacing complete main flow oil filter (M43
BMW AG - TIS
19.01.2013 10:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -