3 Series E46 320d (M47) SAL
Pull shift rod (1) out of shift lever (2).
Remove washers (3).
Installation:
Grease shift rod pin (4).
Grease,
refer to BMW Service Operating Fluids.
Large contact surface of disks (3) must rest on shift rod joint
(2).
Lever out spring (1) with a screwdriver from lug (2) on housing.
Tilt spring (1) upwards.
Remove bearing pin (1).
Installation:
Grease bearing pin (1).
Grease,
refer to BMW Service Operating Fluids.
Detach cable plug (1) from reverse gear switch.
Detach cable from fixtures.
RA Removing and installing transmission (S5D 320Z, M47)
BMW AG - TIS
12.02.2013 14:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
