5 Series E39 M5 (S62) SAL
Caution!
CCW thread!
Brace against twin surface (1) and release hex head (2).
Release toothed shaft screw connection on inlet and exhaust
sides.
Installation:
Installation of the toothed shafts and the VANOS adjustment unit
is described separately from removal. The assembly sequence for
installation and removal is different.
Caution!
Risk of mixing up parts.
The VANOS adjustment units of cylinder banks 1 to 4 and
5 to 8 are different.
1)
Cylinder bank 1 to 4
2)
Cylinder bank 5 to 8
Note:
Install VANOS adjustment unit so that cables of solenoid valves
are at bottom.
Caution!
CCW thread!
Install toothed shafts of inlet and exhaust sides.
Brace against twin surface (1) and release hex head (2).
Tightening torque 10 Nm.
RA Removing and installing/replacing toothed shafts of VANOS gear on right (S62)
BMW AG - TIS
21.02.2013 19:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
