7 Series E38 L7 (M73) SAL
Bonding of rear trim strip:
Carefully open rear door.
Clean trim strip (1) completely and treat area in adhesive channel
(2) with BMW-approved materials (sourcing reference: BMW Parts
Service),
refer to 51 13 ... .
Note:
Note specified ventilation time!
No adhesive is applied in area (A).
(A) = 10 mm
Clean edge of side window (1) at rear and treat with BMW-
approved materials (repair kit, sourcing reference: BMW Parts
Service),
refer to 51 13 ... .
Note:
Note specified ventilation time!
Cut off nozzle to inside diameter (A).
(A) = approx. 3 mm
If applicable, produce a sample bead before gluing.
RA Removing and installing/replacing trim (side window) on door pillar (center door
BMW AG - TIS
22.02.2013 05:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 17 -