7 Series E66 730Li (N52) SAL
Release bolts and remove exhaust system bracket (1).
Release screws (1).
Take off holder (2).
Disconnect plug connector (1).
Unfasten screws (2).
Remove cover plate (3).
Tightening torque 24 11 2AZ
.
Installation:
Release aluminium screw on right next to cable retaining plate
with special tool 00 9 010 .
Aluminium screws must be replaced.
Tightening torque 24 00 2AZ
.
RA Removing and installing automatic transmission (6HP19Z/N52)
BMW AG - TIS
07.02.2013 00:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -