X Series E83 X3 2.5Si (N52K) OFFRD
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque 21 52 5AZ
.
Installation:
Release aluminium screw on right next to cable retaining plate
with special tool 00 9 010 .
Installation:
Aluminium screws must be replaced.
Tightening torque 23 00 2AZ
.
Supporting transmission:
Support transmission with special tools 23 4 050 , 23 0 132 ,
00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
Unfasten screws and remove transmission cross-member.
Tightening torque 22 32 4AZ/5AZ
.
RA Removing and installing transmission (GS6-37BZ N52K)
BMW AG - TIS
11.02.2013 10:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -