Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Engine Torque Strut: Service and Repair
Strut Bracket
REMOVAL
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Remove the engine mount strut.
4. Remove the engine mount strut bracket bolts.
5. Remove the engine mount strut bracket.
INSTALLATION
1. Install the engine mount strut bracket.
2. Install the engine mount strut bracket bolts.
a. Tighten the bolts on the front of the engine to 66 Nm (49 lb ft).
b. Tighten the bolts on the bottom of the engine to 130 Nm (96 lb ft).
3. Install the engine mount strut.
4. Lower the vehicle.
5. Connect the negative battery cable.
