CTS RWD V6-3.6L (2008)
6. Remove the park brake cable guide nut (3) from the mounting stud.
7. Remove the park brake cable guide bolt (1) from the floor panel.
8. Remove the park cable guides (2).
9. Disconnect the intermediate cable (2) from the rear equalizer (3).
10. Disconnect the intermediate cable from the right rear park brake cable connector (1).
11. Disconnect the intermediate cable housing from the rear cable housing retaining bracket by depressing the locking retainer.
12. Remove the intermediate cable from the vehicle.
Installation Procedure
1. Route and install the intermediate park brake cable into park brake cable retaining bracket.
2. Seat the intermediate park cable into the park brake cable retaining bracket.
3. Connect the right rear parking brake cable connector (1) to the intermediate park brake cable (2).
4. Connect the intermediate park brake cable to the equalizer (3).
