Escalade V8-5.7L VIN R (2000)
9. Remove the bushings.
10. Inspect the mounting bolt and the sleeve assemblies for corrosion. Replace any corroded parts. Do not attempt to polish away any corrosion.
Important: Clean the caliper assembly and install a new brake hardware kit. Replace the brake hardware kit with each removal from the rotor.
11. Inspect the bolt boots for any nicks, cuts, or corrosion. Replace any damaged parts.
Installation Procedure
1. Install the new bushings and the bolt seals.
2. Lubricate the bushings and the mounting bolt seals with GM P/N 18010909 or the equivalent.
3. Install the new bolt boots (1), (2).
4. Install the caliper.
