SRX AWD V6-3.0L (2010)
9. Connect the EVAP hose to the upper intake manifold and EVAP solenoid.
10. Connect the PCV tube assembly (1) to the upper intake manifold and the right camshaft cover.
11. Install coolant hose.
12. Install intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Intake Manifold Cover Replacement).
13. Install the coolant air bleed pipe. Refer to Engine Coolant Air Bleed Pipe Replacement (LF1) (See: Cooling System/Coolant Line/Hose/Service
and Repair)Engine Coolant Air Bleed Pipe Replacement (LAU) (See: Cooling System/Coolant Line/Hose/Service and Repair).
14. Install the power steering fluid reservoir upper bracket.
15. Install the power brake booster vacuum check valve and hose. Refer to Power Brake Booster Vacuum Check Valve and Hose Replacement (LF1)
(See: Brakes and Traction Control/Power Brake Assist/Vacuum Pump/Service and Repair)Power Brake Booster Vacuum Check Valve and Hose
Replacement (LAU) (See: Brakes and Traction Control/Power Brake Assist/Vacuum Pump/Service and Repair).