STS RWD V8-4.6L (2007)
Notice: Refer to Torque Reaction Against Timing Drive Chain Notice.
6. Align the timing mark (5) of the RB intake camshaft position actuator with the timing chain black link (8) and install the actuator on the camshaft
with the actuator timing mark perpendicular (90 degrees) to the cylinder head deck surface near the top of its rotation.
7. Loosely install the oil control valve (2) to secure the intake actuator.
Notice: Refer to Fastener Notice.
8. Use an open-end wrench on the hex cast into the camshaft in order to prevent the camshaft from rotating when tightening the oil control valve.
Tighten the oil control valve to 120 N.m (89 lb ft).
