cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Camshaft Position Actuator Housing Replacement - Left Side|Page 4087 > < Camshaft Position Actuator Housing Replacement - Left Side|Page 4085
Page 50
background image

Notice: Refer to Torque Reaction Against Timing Drive Chain Notice.

Notice: Refer to Fastener Notice.

3. Use an open end wrench on the hex cast into the left exhaust camshaft to prevent the camshaft from rotating when tightening the camshaft oil

control valve.

Tighten the camshaft oil control valve to 120 N.m (89 lb ft).

4. Remove the EN 46327 (1).

Camshaft Position Actuator Housing Replacement - Left Side|Page 4087 > < Camshaft Position Actuator Housing Replacement - Left Side|Page 4085