STS RWD V8-4.6L (2007)
6. Install the alignment pin through the solenoid alignment hole and into the oil control valve alignment hole.
Notice: Refer to Fastener Notice.
7. With the alignment pin in place, install the CMP actuator solenoid bolts.
Tighten the CMP actuator solenoid bolts to 8 N.m (71 lb in).
8. Remove the alignment pin.
9. Install a NEW CMP actuator solenoid plug.
10. Connect the electrical connector to the actuator solenoid.
11. Install the fuel injector sight shield.
