C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
2. Install the ignition coil bolts.
Tighten the ignition coil bolts to 12 Nm (106 inch lbs.).
3. If replacing the valve rocker arm cover, install the ignition coil wiring harness.
4. Connect the ignition coil electrical connectors.
5. Install the ignition coil wiring harness bolts.
Tighten the ignition coil wiring harness bolts to 12 Nm (106 inch lbs.).
6. Install the CPA retainers at the ignition coils.
7. Install a NEW valve rocker arm cover gasket if the gasket was removed from the rocker arm cover.
8. Install the valve rocker arm cover.
9. Install the valve rocker arm cover bolts.