Camaro V8-6.2L (2010)
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
7. Install the front park brake cable retainer nut (1) and tighten to 7 Nm (61 lb in).
8. Seat the front park brake cable pass through grommet (2) in the driveline tunnel.
9. Pull the rear park brake cables forward and connect the front park brake cable to the equalizer (1).
10. Install the exhaust muffler intermediate heat shield. Refer to Exhaust Muffler Intermediate Heat Shield Replacement (See: Engine, Cooling and
Exhaust/Exhaust System/Muffler/Service and Repair/Exhaust Muffler Intermediate Heat Shield Replacement).
11. Apply and release the park brake lever 3-4 times to ensure proper operation.
