Corvette V8-6.2L (2008)
4. Install the valve spring to the J 38606 .
5. Compress the valve spring using the J 38606 .
6. Install the valve spring to the cylinder head.
7. Install the valve spring cap (2).
8. Install the valve stem keys (1).
1. Use grease to hold the keys (2) in place and remove J 38606 .
2. Make sure the keys (2) seat properly in the groove of the valve stem.
3. Carefully release the valve spring pressure, making sure the valve keys stay in place.
4. Remove the J 38606 .
5. Tap the end to the valve stem with a plastic faced hammer to seat the keys, if necessary.
9. Disconnect and remove the air supply from the J 22794 .
10. Remove the J 22794 from the spark plug hole.
