Equinox AWD V6-3.4L (2008)
Important: Install all bolts before tightening, then tighten in specified sequence.
4. Install the 8 control valve body bolts (1) M6 x 65.
Tighten the bolts in specified sequence to 12 N.m (106 lb in).
5. Install the 2 control valve body bolts (3) M6 x 55.
Tighten the bolts in specified sequence to 12 N.m (106 lb in).
Notice: Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter
plate to the control solenoid valve assembly, resulting in possible damage or contamination.
6. Install a NEW control solenoid valve assembly filter plate (1).
7. Install the control solenoid valve body and TCM assembly (5).
