Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
12. Install the following components to the vehicle:
^
The suspension support brace (5)
^
The two suspension support brace nuts (4, 6).
Tighten
Tighten the suspension support brace nuts to 69 N.m (51 lb ft).
13. Install the tire and wheel assemblies.
14. Lower the vehicle.
15. Raise the vehicle on a drive-on lift or move the vehicle to an alignment rack. The weight of the vehicle must be supported by the vehicle's tires and
wheels.
16. Stabilize the suspension by lifting up and pushing down the front bumper.
