Prizm L4-108 18L DOHC VIN 8 Suspension Crossmember Replacement Guide
8. Install the following to the right control arm:
^
The two nuts
^
The one bolt
Tighten
Tighten the nuts and the bolt to 142 Nm (105 ft. lbs.).
9. Install the following to the left control arm:
^
The two nuts
^
The one bolt
Tighten
Tighten the nuts and the bolt to 142 Nm (105 ft. lbs.).
10. Remove the jack from the center of the crossmember.
11. Install the nut (14) and the bolt (13).
Tighten
Tighten the nut and the bolt to 60 Nm (45 ft. lbs.).
12. Install the three nuts (12, 15, 16).
Tighten
Tighten the nuts to 57 Nm (42 ft. lbs.).