Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
5. Adjust the probes of J 39200 in contact with both leads of the CPP switch electrical connector (2).
6. Adjust the CPP switch by threading the switch into the clutch and the brake pedal bracket until the continuity is achieved.
7. Install the CPP switch lock nut.
^
Tighten the CPP switch lock nut to 13 Nm (115 inch lbs.).
8. Connect the electrical connector to the CPP switch.
9. Connect the negative battery cable.
