S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Axle Shaft Assembly: Service and Repair
Rear Axle
Axle Shaft Replacement
REAR DRIVE AXLE
REMOVE OR DISCONNECT
-
Raise the vehicle.
1. Rear wheels and drums.
2. Axle housing cover.
-
Clean all dirt from the axle housing cover area.
3. Pinion shaft lock bolt.
4. Pinion shaft.
5. "C" lock from the button end of the axle shaft.
-
Push the axle shaft in toward the center of the vehicle.