Tracker 2WD L4-1.6L VIN 6 (2000)
1. Remove the reservoir (2) from the master cylinder (4). Refer to Master Cylinder Reservoir Replacement (1.6L Non-ABS) or Master Cylinder
Reservoir Replacement (1.6L ABS/2.0L ABS/2.0L Non-ABS).
2. Remove the master cylinder from the booster. Refer to Master Cylinder Replacement (Non-ABS) or Master Cylinder Replacement (ABS).
3. Remove the piston stopper snap ring (1) from the master cylinder (2).
4. Remove the piston stopper.
5. Remove the cylinder cup.
6. Remove the plate.
7. Pull the primary piston assembly carefully from the master cylinder in order to prevent damage to the inside of the cylinder wall.
8. Remove the secondary piston assembly carefully from the master cylinder (1) by tapping the flange on a piece of wood (2) or two soft objects.
9. Remove the secondary piston pressure cup.
10. Remove the piston cup.
11. Remove the O-ring.
12. Inspect all disassembled parts for wear or damage. For a view of the disassembled master cylinder, refer to Master Cylinder Description (1.6L
