Tracker 2WD L4-1.6L VIN 6 (2000)
Fuel Gauge: Service and Repair
Fuel/Temperature Gauge Replacement
REMOVAL PROCEDURE
1. Remove the instrument cluster.
2. Remove the instrument cluster lens and bezel assembly (2) from the instrument cluster (1) by releasing the 6 black plastic tabs.
IMPORTANT: Do not remove the needle from the fuel or temperature gauges. There is no detent or flat spot on the shaft in order to indicate the
correct placement.
3. Remove the following components from the instrument cluster (2):
3.1. The 6 screws (5)
3.2. The fuel/temperature gauge
INSTALLATION PROCEDURE
