Tracker 2WD L4-2.0L VIN C (1999)
Rear Door Interior Handle: Service and Repair
REMOVAL PROCEDURE
1. Remove the screw which secures the rear side door inside handle (1).
2. Slide the inside handle (1) forward in order to release the retaining tabs which secure the handle to the door.
3. Open the rear side door inside handle rod retainer and remove the rear side door inside handle rod from the inside handle (1).
4. Remove the inside handle (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install the rear side door inside handle rod to the rear side door inside handle (1). Secure the rod to the handle by closing the rear side door inside
handle rod retainer.
2. Install the inside handle (1) to the door by sliding rearward to engage the retaining tabs. Secure the handle with the screw.
