Tracker 2WD L4-2.0L VIN C (1999)
Rear Door Striker: Service and Repair
REMOVAL PROCEDURE
1. Mark the position of the front side door lock striker (2) on the door jamb for ease of installation.
2. Remove 2 screws and the front side door lock striker (2) from the door jamb.
INSTALLATION PROCEDURE
1. Install the rear side door lock striker (2) to the door jamb. Secure the striker with the 2 screws.
2. Adjust the rear side door lock striker vertical measurement so that the striker (2) shaft aligns with the center of the rear side door lock (1).