PT Cruiser L4-2.4L (2008)
6. Install the two nuts (1) that secure the hydraulic pump/motor assembly to the top of the shelf panel. Tighten the nuts securely.
7. Install the six retaining clips (3 per side) that secure the hydraulic hoses and wire harness to the body.
8. Connect the convertible top wire harness to the main body harness.
9. Install the protective cover (3) to the top of the hydraulic pump/motor assembly (4) located on the shelf panel (2).
10. Position the convertible top well liner (2) into the vehicle and install the push-pins (1) that secure the liner to the rear seat back panel (3) and body
(4).
11. Install the rear seat back See: Seats/Seat Back/Service and Repair/Seat Back - Installation.
12. Install the interior quarter trim panels See: Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter Panel Trim/Installation - Convertible.
13. Install the rear seat cushion See: Seats/Seat Cushion/Service and Repair/Seat Cushion - Installation.
14. Reconnect the negative battery cable.
